Bearing >
Deep groove ball bearings are the most common bearing type. They accommodate both radial and axial loads in both directions and are suitable for high rotational speeds. 
Ceramic bearings have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working, high and low- temperature resistance etc. 
Supply all kinds of ball bearing with material of Stainless Steel, such as AISI304, AISI316, AISI440B, AISI440C. 
Insert bearings are designed in almost the same way as deep groove ball bearings, except that the outer ring is spherical. 
Tapered roller bearings mainly burden the joint load from radial and shaft side. This kind of bearings has strong load capability
Needle-cage assembly drawn cup roller bearings, light and mid-sized needle roller bearings, and thrust needle roller bearings are suitable for conditions requiring small space and high load capacity. 
Linear Motion Bearings consists of an outer cylinder, ball retainer, balls and two end rings. It has high precission and rigidity, ease of assembly, and ease of replacement 
Self-aligning ball bearings are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway
According to the customers’ requirements, our special engineer can design and produce all kinds of nonstandard bearings.
Water pump bearings are used primarily in automotive water pumps and basically consisted of standard double row bearings 
Thrust ball bearings can support high axial forces but must not be subjectedto radial loads, single and double direction designs available.
These units consist of a double-sealed single-row deep groove bearing, and castiron (or other material) housing in various configurations
With the same center as the bearing, the spherically formed outer ring raceway can make self-alignment. 
Many kinds of automotive bearings available: such as wheel hub
unit bearings, clutch bearings and multi-tough bearings. 
As their rollers linearly come into contact with inner ring and outer ring with less coefficient of friction, these bearings have very good capacity of radial load
Thrust Self-Aligning Roller Bearings
The bearings can be dismantled. The parts of the bearings can be fitted separately. Axial spherical roller bearings can support very high axial loads and permit relatively high speeds.Double Row Deep Groove Ball Bearings
Double row deep groove ball bearings feature higher load ratings than single row bearings, but are very sensitive to misalignments. Spherical Plain Radial bearings and Rod Ends
they can bear radial, axial load and their combined load, have big load capacity and characteristics of wear-resistance, wear-corrosion, self-aligning and self-lubricate
Angular contact ball bearings are able to support radial load and axial load. Retainers are made of brass, synthetic resins or others according to individual bearing features and applications.
